The 10 Best Saw Blade For Melamine

Last Update:

Our team studied on hundred of reviews available online for Saw Blade For Melamine, chose the finest ones and prepared Saw Blade For Melamine Reviews for you. It was very difficult to shortlist the ideal Saw Blade For Melamine from thousands of products online. However, We tried to make sure that you get only the Best Saw Blade For Melamine from our suggestions. Check our listings-:

Best Saw Blade For Melamine
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Best Saw Blade For Melamine

We’ve scanned thousands reviews for you. If you are looking for the Saw Blade For Melamine than this review article may help you.

NoProductScoreAction
1Freud D1296L Diablo Melamine9Buy Now
2Freud 10" x 80T Thin Kerf Ultimate Plywood & Melamine Blade (LU79R010)8.8Buy Now
3Amana Tool - MB10800C Electro-BLU Carbide Tipped Double-Face Melamine 10" Dia x 80T H-8.6Buy Now
4Freud D0760A Diablo 7-1/4" x 60-Tooth Ultra Fine Finishing Circular Saw Blade with 5/8" Arbor and Diamond Knockout Single Blade8.6Buy Now
5DEWALT DWA171460 7-1/4-Inch 60-Tooth Circular Saw Blade8.6Buy Now
6Freud 10" x 80T Ultimate Plywood & Melamine Blade (LU80R010)8.4Buy Now
7Norske Tools NCSBP272 8-1/4 inch 60T Melamine Plus Saw Blade For Ultra-smooth Cutting of Melamine8.4Buy Now
8BOSCH DCB1080 Daredevil10-Inch 80-Tooth Extra-Fine Finish for Melamine and Finished Plywood Circular Saw Blade8.4Buy Now
9Freud 10" x 80T Double Sided Laminate/Melamine Blade (LU97R010)8.4Buy Now
10Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor8.2Buy Now

Table Of Content:

1. Freud D1296L Diablo Melamine

  • Special Tico Carbide formula offers a blend of carbide with low Cobalt content that produces a very “hard” carbide for long cutting life.
  • This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock), double-sided laminates and melamine cleanly.
  • Features Freud’s Perma-Shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies.
  • Thin kerf design to increase machine performance.
  • Freud’s Limited Lifetime Guarantee

2. Freud 10″ x 80T Thin Kerf Ultimate Plywood & Melamine Blade (LU79R010)

  • 10″ Blade Diameter, 80 Teeth, Hi-ATB Grind, 5/8″ Arbor, .098″ Kerf, 2° Hook Angle
  • Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • High Alternate Top Bevel (Heat)Tooth Design produces splinter-free cuts
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.
  • Parma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

3. Amana Tool – MB10800C Electro-BLU Carbide Tipped Double-Face Melamine 10″ Dia x 80T H-

  • D) diameter: 10 (250mm)
  • Teeth: 80
  • D) Bore: 5/8
  • Tooth grind: Hi-ATB
  • Hook angle: -6°

4. Freud D0760A Diablo 7-1/4″ x 60-Tooth Ultra Fine Finishing Circular Saw Blade with 5/8″ Arbor and Diamond Knockout Single Blade

  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4″ Diameter 5/8″ Arbor with Diamond Knockout 0.059″
  • 7-1/4″ 60T Diablo Ultra Finish Work Table Saw BladeThe Diablo Ultra Finish
  • Used in miter saws or table saws,

5. DEWALT DWA171460 7-1/4-Inch 60-Tooth Circular Saw Blade

  • Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
  • Tough coat anti-stick coating reduces friction and gumming
  • Thin kerf design for smooth cuts
  • Reinforced shoulder for impact resistance in nail-embedded wood
  • Optimized for use on both corded and cordless circular saws

6. Freud 10″ x 80T Ultimate Plywood & Melamine Blade (LU80R010)

  • 10″ Blade Diameter, 80 Teeth, Hi-ATB Grind, 5/8″ Arbor, .126″ Kerf, 2° Hook Angle
  • Premium TiCo Hi-Density Carbide Crosscutting Blend for Maximum Performance
  • High Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cuts.Maximum RPM:7000
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

7. Norske Tools NCSBP272 8-1/4 inch 60T Melamine Plus Saw Blade For Ultra-smooth Cutting of Melamine

  • The ULTIMATE finishing blade; features special 35 degree high ATB tooth design for ultra-smooth cutting of melamine, laminate, hardwoods and laminate flooring.
  • C4 Micro-grain carbide tips precision sharpened on all sides
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation
  • For professional carbinet makers, trim carpenters and avid Do-It-Yourselfers

8. BOSCH DCB1080 Daredevil10-Inch 80-Tooth Extra-Fine Finish for Melamine and Finished Plywood Circular Saw Blade

  • Brute Carbide – an upgraded C3/C4 micro grain formulation for increased impact damage resistance
  • ATB tooth geometry – for fast Cross cutting, cutoff and trim of wood and plywood
  • Speed coat – an antifriction finish for faster cutting with no burning or melting
  • Thinner kerf – provides faster cuts and less waste
  • Extra-hard steel blade body – delivers accuracy and resists bending and Deflection for true cuts
  • Edge blades – developed for extreme performance for specific material and application
  • Quality manufacturing – features the best materials and innovative engineering

9. Freud 10″ x 80T Double Sided Laminate/Melamine Blade (LU97R010)

  • 10″ Blade Diameter, 80 Teeth, TCG Grind, 5/8″ Arbor, .126″ Kerf, -3° Hook Angle
  • Premium TiCo HI-Density Carbide Laminate Blend for Maximum Performance
  • Triple Chip Grind (TCG) Tooth Design with a positive hook angle for long life in production applications.
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

10. Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor

  • Ultra thin kerf for fast, easy cutting and minimum waste
  • Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness.
  • Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
  • Features Freud’s Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications.
  • Ultra thin kerf for fast, easy cutting and minimum waste
  • Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness.
  • Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
  • Freud’s Limited Lifetime
  • Features Freud’s Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications.
  • Ultra thin kerf for fast, easy cutting and minimum waste
  • Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness.
  • Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
  • Freud’s Limited Lifetime Guarantee

Saw Blade For Melamine Buying Guide


Does the thought of finding a great Saw Blade For Melamine stress you out? Has your mind been juggling between choices when it comes to buying Saw Blade For Melamine in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Saw Blade For Melamine for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Saw Blade For Melamine Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Saw Blade For Melamine in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Saw Blade For Melamine currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Saw Blade For Melamine brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Saw Blade For Melamine based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Saw Blade For Melamine before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Saw Blade For Melamine they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Saw Blade For Melamine, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Saw Blade For Melamine before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Saw Blade For Melamine will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Saw Blade For Melamine if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Saw Blade For Melamine on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Saw Blade For Melamine on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Saw Blade For Melamine featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment